REFERENCES

1. Illuminating Engineering Society of North America. 2000. IESNA Handbook, Ninth Edition, New York.
   
   
2. Society of Automotive Engineers. 1989. SAE Surface Vehicle Standard J602: Headlamp Aiming Device for Mechanically Aimable Headlamp Units. Warrendale, PA: Society of Automotive Engineers.
   
   
3. Society of Automotive Engineers. 2004. SAE Surface Vehicle Recommended Practice J575: Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width. Warrendale, PA: Society of Automotive Engineers.
   
   
4. Society of Automotive Engineers. 2000. SAE Surface Vehicle Information Report J1330: Photometry Laboratory Accuracy Guidelines. Warrendale, PA: Society of Automotive Engineers.
   
   
5. Calderas J., personal communication, August 22, 2000.
   
   
6. Erion J., personal communication, June 5, 2000.
   
   
7. Dutke F.F., personal communication, June 20, 2000.
   
   
8. Schnell T., personal communication, August 24, 2000.
   
   
9. Wall, D., personal communication, November 1, 2004.
   
   
10. Society of Automotive Engineers. 1997. SAE Surface Vehicle Standard J599: Lighting Inspection Code. Warrendale, PA: Society of Automotive Engineers.
    
    
11. Society of Automotive Engineers. 1996. SAE Surface Vehicle Recommended Practice J1383: Performance Requirements for Motor Vehicle Headlamps. Warrendale, PA: Society of Automotive Engineers.
    
    
12. Copenhaver, M.M. and Jones, R.E. Jr. (1992). Measurement of Headlamp Aim and the Electrical and Photometric Performance Characteristics of Rear Lighting Systems. (Tech. Report DOT HS 807 930). Washington, DC: National Highway Traffic Safety Administration.
    
    

Previous | Table of Contents

TFHRC Home | FHWA Home | Feedback United States Department of Transportation - Federal Highway Administration