Virmani, Y.P., Jones, W.R., and Jones, D.H. (1984). Public Roads, 84(3), 96.
Koch, G.H., Brongers, P.H., Thompson, N.G., Virmani,
Y.P., and Payer, J.H. (March 2002). Corrosion
Costs and Prevention Strategies in the United States. Report No.
FHWA-RD-01-156.
Federal Highway
Administration.
Washington,
DC.
Yunovich, M., Thompson, N.G., and Virmani, Y.P. (2003). "Life Cycle Cost Analysis for Reinforced Concrete Bridge Decks." Paper No. 03309. Presented at CORROSION/03, March 10-14. San Diego, CA.
Stratfull, R.F., Jurkovich, W.J., and Spellman, D.L. (1975). Transportation Research Record, 539, 50.
(2002). "Frequency
of Inspections." Code of Federal Regulations, Section 650.305. U.S. Government
Printing Office. April 1, 2002 revision.
Washington,
DC.
Tutti, K. (1983). "Corrosion of Steel in Concrete." Report No. 4. Swedish Cement and Concrete Research Institute.
Stockholm, Sweden.
Glass, G.K. and Buenfeld, N.R. (1995). "Chloride
Threshold Levels for Corrosion
Induced Deterioration of Steel in Concrete." Paper No. 3 presented at RILEM
International Workshop on Chloride Penetration into Concrete. October 15-18.
Saint Rémy-les-Chevreuse, France.
Sagúés, A.A. (2003). "Modeling the Effects of Corrosion
on the Lifetime of Extended Reinforced Concrete Structures." Corrosion, 59, 854.
Torres-Acosta, A.A. and Sagúés, A.A. (2000). "Concrete
Cover Cracking with Localized Corrosion of the Reinforcing Steel." Proc. 5th
CANMET/ACI International Conference on Durability of Concrete, SP-192, Ed. v.M.
Malhotra. American Concrete Institute. 591.
Farmington
Hills,
MI.
Clifton,
J.R., Beehgly, H.F., and Mathey, R.G. (1974). Non-Metallic Coatings for Concrete Reinforcing Bars. Report No.
FHWA-RD-74-18.
Federal Highway
Administration.
Washington,
DC.
Virmani, Y.P. and Clemena, G.G. (1998). Corrosion Protection: Concrete Bridges. Report
No. FHWA-RD-98-088.
Federal
Highway Administration.
Washington,
DC.
Powers, R.G. and Kessler, R. (1987). Corrosion Evaluation of Substructure, Long
Key Bridge. Corrosion Report No. 87-9A. Florida Department of Transportation. Gainesville, FL.
Powers, R.G. (1988). Corrosion of Epoxy-Coated Rebar. Keys Segmental Bridges
Monroe County. Report No. 88-8A. Florida Department of Transportation. Gainesville, FL.
Zayed, A.M. and Sagúés, A.A. (1989). "Corrosion of
Epoxy-Coated Reinforcing Steel in Concrete." Paper No. 386. Presented at
CORROSION/89, April 21. New Orleans, LA.
Hartt, W.H., Powers, R.G., Leroux, V., and Lysogorski, D.K. (2004). A Critical Literature Review
of High-Performance Reinforcements in Concrete Bridge Applications. Report
No. FHWA-HRT-04-093. Federal Highway Administration. Washington, DC.
Hartt, W.H., Powers, R.G., Lysogorski, D.K., Liroux,
V., and Virmani, Y.P. (2007). Corrosion
Resistant Alloys for Reinforced Concrete. Report No. FHWA-HRT-07-039. Federal Highway Administration.
Washington,
DC.
"Standard Practice for Making and Curing Concrete
Specimens in the Laboratory."
ASTM C192-04. American Society for Testing and Materials. Annual Book of Standards. West
Conshohocken, PA.
Krane, S.C., Sagúés, A.A., and P-Moreno, F. (2002). "Decreased
Corrosion Initiation Time of Steel in Concrete due to Reinforcing Bar Obstruction of Diffusional
Flow." ACI Materials Journal, 99(1), 51.
Yu, H. and Hartt, W.H. (2007). "Effect of Reinforcement
and Coarse Aggregates on Chloride Ingress into Concrete and Time-to-Corrosion:
Part I-Spatial Chloride Distribution and Implications." Corrosion, 63, 843.
Yu, H., Himiob, R.J., and Hartt, W.H. (2007). "Effect
of Reinforcement and Coarse Aggregates on Chloride Ingress into Concrete and
Time-to-Corrosion: Part II-Spatial Distribution of Aggregates." Corrosion, 63, 924.
Clemena, G.G. and Virmani, Y.P. (2004). "Comparing the
Chloride Resistances of Reinforcing Bars." Concrete
International, 39.
Sagúés, A.A., Krane, S.C., Presuel-Moreno, F., Rey, D., Torres-Acosta, A., and Yao, L.
(2001). "Corrosion Forecasting for 75-Year Durability Design of Reinforced Concrete."
Report No. BA502, Submitted to Florida Department of Transportation by University of
South Florida. December 31, 2001.